Basic Info.
Application Area
Daily Chemical
Yielding Capacity
90-100kg/Batch, 8-12min/Batch, 500-600kg/H
Installed Power
Around 68kw
Inner Raw Material for Pot
Stainless Steel 304
Transport Package
PE Film + Wooden Pallet
Specification
4000(L)× 4000(W) × 4000(H)
Product Description
1Technical parameter and performance
Part No. | KBS-L300/600N Vertical mixing unit | |
1.1 main performance |
Description | Hot mixing 300L | Cool mixing 600L | Remark |
Total volume(L) | 300 | 600 | |
Effective volume(L) | 225 | 400 | |
One-time feeding(kg) | 125-150 | 150 | |
Material density(g/cm3) | 0.6 | 0.6 | refer to PVC-U |
Mixing time(min.) | 8~12 | 8~12 | |
Output(kg/h) | 500-600 | 500-600 | |
dimension(mm) | 3650*2200*2485 | |
Weight(kg) | 3800 | |
1.2 main technical parameters |
Inner wall material of pot | Stainless steel 304 | |
Inner wall thickness(mm) | 6 | 5 | |
Outer wall material | High quality Carbon steel | |
Outer wall thickness(mm) | 5 | 5 | |
Intermediate sandwich filler | 10mm insulation cotton | Cooling water | |
Bowl body finishing | paint | paint | |
Heating method | Self-friction | / | Standard |
Self-friction/heating transfer oil | / | |
Cooling method | / | Intermediate sandwich filler and water cycle | Water temp.:around 15ºC |
Cooling water innet size | / | Intermediate layer:inlet: 1¼",outlet: 1½" | No valve at outlet |
/ | Water cycle:inlet: 1",outlet: 1" |
Pot lid material | Cast aluminum | Cast aluminum | |
Pot lid openning way | By cylinder pushing the guide column | By cylinder pushing the guide column | Manual rotary valve |
Top lid Sylinder brand | Taiwan AirTAC | Taiwan AirTAC | |
Lid fixing method | Snap lock | Snap lock | |
Lid opening protecting method | Limit switch | Limit switch | Power off main switch for maintenance |
Material temperature measurement method | By thermocouple | By thermocouple | |
Thermocouple type | K type | K type | |
Thermocouple quantity | 1pc | 1pc | |
Blade material | Alloy material | Stainless steel | |
Blade type | Triple type | Single type | |
Blade finish | polish | | |
Blade low speed(rpm) | 430 | / | Can set hot mixing speed |
Blade max speed.(rpm) | 860 | 80 | Can set hot mixing speed |
Material discharge way | Plunger block | Plunger block | Manual/automatic |
Discharge Tee material | Cast aluminum | Cast aluminum | |
Discharge Cylinder brand | Taiwan AirTAC | Taiwan AirTAC | |
spindle material | 45# quenched tempered steel | 45# quenched tempered steel | |
Bearing brand/origin | Wahaluo | Wahaluo | |
spindle sealing way | Anti-friction,high temperature Skeleton oil sealing and gas seal | Skeleton sealing | |
Lubricant method | By manual pump injection grease | By oil gun | |
Spindle transmission method | Belt transmission | Belt transmission | |
Spindle temperature measurement method | By thermocouple | / | Predict bearing damage |
Thermocouple type | K type | / | |
Thermocouple quantity | 1pc | / | |
Startup mode | Soft start | Direct drive | Hot Mixing frequency setting speed |
Frame material | High quality carbon steel | High quality carbon steel | |
Anti-rust treatment | Anti-rust paint | Anti-rust paint | Paint after metal surface rust removal |
non-slip platform | Tread plate | / | Main platform is carbon plate |
Stair handrail | Carbon steel+paint | / | Orange |
Stair pedal | Tread plate | / | |
1.3.main electric data |
Name | 300L hot mixer | 600L cool mixer | Remark |
Motor power(KW)/grade | 55/4 | 7.5/4 | |
Motor brand | XI'AN XIMA | XI'AN XIMA | |
Drive way | Variable frequency drive | Direct drive | |
Inverter brand | Germany Bosch Rexroth | / | Or ABB |
Main switch | LS | LS | LG |
Temperature control instrument | OMRON | OMRON | OMRON |
Current and voltage meter | DELIXI | DELIXI | |
breaker | Schneider | Schneider | Schneider |
Intermediate relay | OMRON | OMRON | OMRON |
Timing relay | xinling | xinling | |
Button/knob switch | Schneider | Schneider | Schneider |
Contacter | Schneider | Schneider | Schneider |
Limit switch | OMRON | OMRON | OMRON |
Solenoid valve | Taiwan AirTAC | Taiwan AirTAC | |
2. Spare part list(free of charge):No | Equipments | Qty |
1 | Thermocouple: | 1pc |
2 | Host Seal: | 1set |
3 | Demolition screw tool: | 1pc |
4 | dust collector bag | 2pcs |
5 | lid seal | 6m |
6 | Tee seal | 1set |
7 | power cable from panel to machine | 1set (<5m) |
8 | control cable from panel to machine | 1set (<5m) |
9 | operating instructions | 1set |
3. After ServiceA. Technical documentation |
All symbols on the equipment will be in English. COMPASON is responsible for providing the Buyer with a general layout plan, electrical plan, installation orientation and manuals, in English. |
B. Arrangements for inspection, installation and testing of the equipment |
a. After all of the equipment is delivered to the customer's factory, the Buyer shall be responsible for all preparation work, e.g. electricity supply, water supply, cranes and labor, etc. b. COMPASON will prepare visa applications for their engineers, who will assist in the equipment installation and testing at the Buyer's factory. c. The Buyer will buy a round-trip air ticket for the engineer(s) after the visa application is approved. The Buyer is responsible for all expenses generated, e.g. visa application fees, meals, accommodation and an allowance of $60.00 per day for each engineer. d. The engineer(s) will provide free training for the operators and maintenance people, in Buyer's factory. e. If the Buyer does not request commissioning by COMPASON's engineer(s) within four months from the date of the bill of lading, it will be accepted that all the equipment has been successfully tested and approved by the Buyer. |
C. Quantity and quality guarantee |
a. In cases of quantity discrepancies or equipment damage, at the destination, the Buyer will file a claim within 30 days after the arrival of the goods at its destination. The insurance company and the shipping company will be responsible for all discrepancies and damage caused by the shipping company or other transportation companies. b. Guarantee period and after-sales services: 13 months from the date of the bill of lading. During this guarantee period, if there is a quality issue, COMPASON will provide spare parts without charge. If malfunctions are caused by the Buyer's improper operation of equipment, COMPASON will provide the Buyer with spare parts at cost prices. c. Long-term service: Beyond one year, COMPASON will provide the Buyer with spare parts at reasonable prices and provide long-term technical guidance. |
D. Validity: Three months from the quotation date. |
Address:
Hantong Road 88, Wujie Town, Tongzhou District, Nantong, Jiangsu, China
Business Type:
Trading Company
Business Range:
Manufacturing & Processing Machinery
Company Introduction:
Compason intelligent machinery (Nantong )Co., Ltd, Company is located in Nantong Yangtze River delta economic zone, is a professional high and new technology enterprise specialized in developing, producing and selling blow molding equipment and mold industry, centralized feeding system, plastic recycling machines, automatic mask machine and melt-blown non-woven fabric machines.
The products are suitable for processing different plastic hollow container, covering a wide range of plastics involved in pharmaceutical, chemical, petroleum, food, lighting, tools, automobile, chemical industry, toys, etc. The high quality bottle blowing machinery equipment and technology developed by the company is highly praised by the customers at home and abroad for its high output, good quality, stable performance and excellent function.
Since we start this new enterprise, we place most attention on building a strong and experienced techinician team from industrial designing, electrical automatation, program engineering, factory production line layout, problem shoot, fault detection and etc. Based on this team and these engineers from brand companies and first row factories, we have the faith and ability to say we can provide our customs the one-stand plastic solution, not just the machines, but also the before and after sale service.
Our company provides good and perfect customer service and technical support, committed to the construction of resource-saving, environmentally friendly, low-carbon economy, civilized and harmonious new enterprise and strive!
We always adhere to the "quality, innovation, integrity, win-win" business philosophy, and strive to give full play to the enterprise′s own technical advantages, and strive to meet the needs of customers with reasonable price, excellent quality, efficient service.